Click on the image to check the artwork
Â
The HS PA30-E represents an advanced phased array detector which can effectively meet intricate phased-array detection needs and process detection information promptly.
Furthermore, this system can be configured to accommodate two sets of TOFD inspection channels, facilitating the integration of dual-phased array scan with TOFD imaging. Its capabilities extend to conducting thorough scans and inspections of welds, encompassing a thickness of up to 100mm in a single operation.
Â
Â
The HSPA30-E instrument has the following features:
The focus law offers versatility by supporting multiple PA scanning methods, enabling simultaneous scanning and imaging.
Incorporate a dual TOFD channel feature that facilitates integrated imaging through dual phased array TOFD (PAUT).
Equipped with dual linear array (DLA) and double-sided array (DMA) capabilities for effective austenitic stainless steel detection.
Facilitate the output of multi-channel video signals to distinct screen displays, along with feedback control.
Support a dual-axis encoder interface for two-dimensional corrosion C scanning and wheel probe detection.
Enable high-speed network transmission, allowing for real-time data uploading and downloading.
Â
The HSPA30-E instrument can be used in the following areas:
Conduct phased array inspections on plates, pipes, and welds.
Equipped with a dual-line array configuration of 2*32 elements, enabling effective detection of double-sided array austenitic stainless steel.
Optimal for phased array inspections involving intricate structures or materials, including but not limited to PE pipe electrical conduits, composite materials, TKY butt welds, flanges, blades, etc.
Â
Â
|
Phased Array Parameter |
|||
|
Parameter classification |
Parameter remarks |
Phased array channel |
Conventional channel |
|
PA/UT configuration |
Receive/transmit |
32/128 |
4-channel TOFD (2 pairs, one transmit and one receive) |
|
Pulser |
Pulse voltage |
50V-100V Continuously adjustable |
100V-350V Continuously  adjustable |
|
Pulse excitation method |
Negative square wave |
Negative square wave |
|
|
Pulse width |
30ns~500ns/2.5ns |
30ns~500ns/2.5ns |
|
|
Pulse rise time |
<8ns |
<15ns |
|
|
Repetition frequency |
200Hz -10KHz |
200Hz -1KHz |
|
|
Delay accuracy |
0-20us/2.5ns |
0-655us/10ns |
|
|
Transmit impedance |
/ |
500/25Ω |
|
|
Receiver |
Gain range |
0~80dB |
0~110dB |
|
System  bandwidth |
0.5-20MHz |
0.5-15MHz |
|
|
Receive delay |
50us/2.5ns |
/ |
|
|
Data acquisition |
Sampling Rate |
100MHz |
100MHz |
|
Maximum A-scan length |
8192 |
2048 |
|
|
Focus mode |
Regular/dynamic/full range |
/ |
|
|
Focus type |
Depth/sound path/horizontal |
/ |
|
|
Scan and display |
Detection wave |
Positive detection, negative detection, full detection, radio frequency |
Positive detection, negative detection, full detection, radio frequency |
|
Scan type |
S Scan/L Scan/Composite Scan |
/ |
|
|
Display mode |
A/B/C/L/S/3D |
A/B/C |
|
|
Programmable TCG |
Number of points |
32 |
/ |
|
Maximum gain |
40 dB, Gain step is 0.1 dB |
/ |
|
|
Maximum gain slope |
40 dB/us |
/ |
|
|
Data storage |
SSD |
256G |
 |
|
Monitor |
Screen size |
10.1" |
 |
|
Resolution |
1280x800 |
 | |
|
Touch screen type |
Capacitive touch screen |
 | |
|
I/O interface |
USB |
USB3.0/ USB2.0 |
 |
|
Ethernet |
1000Mb/s |
 | |
|
Video output mode |
HDMI |
 | |
|
Encoder |
ODU-7PIN Dual encoder |
 | |
|
Language |
 |
Chinese / English |
 |
|
Power supply |
DC supply voltage |
DC15V |
 |
|
Battery |
11.1V-17AH |
 | |
|
Continuous working time |
No less than 4 hours |
 | |
|
Total Weight |
The whole machine without a battery is 3.6kg, battery 900g |
 |  |
|
Overall size |
340mmx230mmx100mm |
 |  |
Â
http://www.ndtzkcx.com/